← Back to Scanner
B

qualys.com

Posture Score: 85/100

Scanned May 8, 2026 at 4:21 PM UTC

Identity

76

Attack Surface

80

Reputation

99

Identity Findings

Weak DKIM RSA key (~1296 bits) for selector 's2'
RSA keys shorter than 2048 bits are considered weak. Current key is approximately 1296 bits.
💡 Generate a new 2048-bit (or larger) RSA key pair and update the DKIM record.
high
No MTA-STS record found
Without MTA-STS, mail transport encryption cannot be enforced and is vulnerable to downgrade attacks.
💡 Publish a _mta-sts TXT record and host a policy file at https://mta-sts.qualys.com/.well-known/mta-sts.txt
medium
STARTTLS without MTA-STS or DANE protection
STARTTLS alone is vulnerable to downgrade attacks. Neither MTA-STS nor DANE is configured to enforce encryption.
💡 Deploy MTA-STS and/or DANE to protect against STARTTLS stripping attacks.
medium
No TLS-RPT record found
Without TLS-RPT, you will not receive reports about TLS negotiation failures.
💡 Publish a _smtp._tls TXT record (e.g. "v=TLSRPTv1; rua=mailto:tls-reports@qualys.com").
low
ARC support not detected
No evidence of ARC (Authenticated Received Chain) support on MX servers. Forwarded messages may lose authentication.
💡 Consider enabling ARC signing on your mail servers to preserve authentication through forwarding.
low
Invalid iodef URI format
The iodef value 'digicert.com' does not appear to be a valid mailto: or https: URI.
💡 Set the iodef value to a valid URI (e.g., mailto:security@example.com).
low
Very low TTL on MX records: 282s
2 MX records have a TTL of 282s or less (below 300s).
💡 Increase the TTL to at least 300 seconds unless frequent changes are expected.
low
Very low TTL on TXT records: 282s
23 TXT records have a TTL of 282s or less (below 300s).
💡 Increase the TTL to at least 300 seconds unless frequent changes are expected.
low
Very low TTL on SPF record: 282s
The SPF record has a TTL of 282s or less (below 300s).
💡 Increase the TTL to at least 300 seconds unless frequent changes are expected.
low
Very low TTL on DMARC record: 282s
The DMARC record has a TTL of 282s or less (below 300s).
💡 Increase the TTL to at least 300 seconds unless frequent changes are expected.
low
NS TTL mismatch between parent and authoritative zone
The NS record TTL in the parent zone (~7182s) differs significantly from the authoritative zone (~86400s).
💡 Align NS record TTLs between the parent zone delegation and the authoritative zone.
low
SPF record is valid
The SPF record is properly configured with valid syntax and within lookup limits.
pass
DKIM cryptographic configuration is compliant
No RFC 8301 compliance issues detected in DKIM key configuration.
pass
MX records are valid
All MX records are properly configured.
pass
SMTP security checks passed
No open relay, VRFY/EXPN, or banner disclosure issues detected.
pass
SMTP RFC 5321 compliance checks passed
The mail server accepts postmaster@ and abuse@ and uses a valid FQDN in EHLO.
pass
IPv6 readiness is good
IPv6 records are present and properly configured.
pass
NS delegation is properly configured
All nameservers are responsive, consistent, and properly secured.
pass
DNS responses are consistent across all nameservers
All authoritative nameservers return consistent answers with proper AA flags.
pass
DKIM2 not detected
No DKIM key record with v=2 was found across common selectors. DKIM2 is an emerging standard and not yet widely deployed.
informational
DMARC alignment: adkim=r, aspf=r
DKIM alignment is relaxed, SPF alignment is relaxed.
informational
DMARC failure reporting: fo=1
Failure reports generated when any authentication mechanism fails.
informational
DMARCbis np tag absent
The DMARC record does not include the np (non-existent subdomain policy) tag. Consider adding np=reject to protect non-existent subdomains under DMARCbis.
informational
Deprecated DMARCbis tags found: pct
The DMARC record contains tags deprecated in DMARCbis: pct. Consider removing these for forward compatibility.
informational
DMARCbis psd tag absent
The DMARC record does not include the psd (public suffix domain) indicator. Consider adding psd=n to explicitly identify this as an organizational domain.
informational
No DANE/TLSA records found
DANE is not configured for any MX server. This is optional but provides strong certificate binding.
informational
No BIMI record found
BIMI is not configured. Your brand logo will not display in supporting email clients.
informational
Open mail ports on mxa-001ca501.gslb.pphosted.com
Detected open mail-related ports: 25
informational
RFC 8058 one-click unsubscribe assessment
DKIM signing is configured. RFC 8058 compliance depends on List-Unsubscribe and List-Unsubscribe-Post headers being included in outbound messages and DKIM signatures.
informational
MX IP network diversity
All MX IPs are in the same /16 network. Consider diversifying across networks for resilience.
informational
SOA record parameters
Serial: 2403681350, Refresh: 10000s, Retry: 2400s, Expire: 604800s, Min TTL: 1800s
informational
Authorized certificate authorities
CAA records restrict certificate issuance to: pki.goog; cansignhttpexchanges=yes, ssl.com, comodoca.com, digicert.com; cansignhttpexchanges=yes, letsencrypt.org
informational

Attack Surface Findings

NSEC records enable zone walking
The domain uses NSEC records for DNSSEC authenticated denial of existence. NSEC records can be walked to enumerate all names in the zone, effectively disclosing the entire zone contents.
💡 Switch from NSEC to NSEC3 with opt-out to prevent zone enumeration. Use NSEC3 with a random salt and sufficient iterations.
high
Domain enumerability: high
The domain is highly enumerable. Zone transfers, NSEC zone walking, or a combination of factors make it easy to discover all DNS records.
💡 Restrict zone transfers, use NSEC3 instead of NSEC, consider wildcard certificates to reduce CT log exposure, and implement rate limiting on DNS queries.
high
NSEC used instead of NSEC3 (zone enumeration possible)
The domain uses NSEC records for authenticated denial of existence. NSEC allows zone walking.
💡 Migrate from NSEC to NSEC3 to prevent zone enumeration.
medium
No internal information leakage detected
No non-routable IP addresses or internal references were found in public DNS records.
pass
No email autodiscovery endpoints detected
No Microsoft Autodiscover, Mozilla Autoconfig, or email SRV records were found.
pass
11 subdomain(s) discovered for qualys.com
Subdomains were enumerated via Certificate Transparency logs, DNS wordlist brute-forcing, and DNS record analysis.
informational
0 certificate(s) found in CT logs
Certificate Transparency logs contain 0 certificate(s) for qualys.com and its subdomains. Each certificate reveals subdomain names.
informational
DNSSEC is enabled
DNSKEY and/or DS records are present, indicating DNSSEC is configured.
informational

Reputation Findings

HSTS enabled but missing preload directive on qualys.com
Strict-Transport-Security: max-age=31536000
💡 Add the "preload" directive to the HSTS header and submit the domain to hstspreload.org.
low
security.txt present
Found security.txt at https://qualys.com/.well-known/security.txt.
pass
TLS certificate valid for 89 days
Certificate for qualys.com expires on 2026-08-05.
pass
Certificate issued by WR1
The certificate for qualys.com is issued by a third-party CA.
pass
Signature algorithm: rsa-sha256
The certificate for qualys.com uses an acceptable signature algorithm.
pass
RSA key: 2048 bits
The certificate for qualys.com uses an adequate RSA key of 2048 bits.
pass
SCTs present in certificate
The certificate for qualys.com contains Signed Certificate Timestamps.
pass
No weak ciphers detected
No known weak cipher suites detected on qualys.com.
pass
Domain valid for 641 days
Domain qualys.com expires on 2028-02-09.
pass
Domain transfer and delete locks enabled
Domain qualys.com has clientTransferProhibited and clientDeleteProhibited locks.
pass
Google Safe Browsing DNS check — no flag detected
DNS-based Safe Browsing lookup returned no results. Full verification requires the Google Safe Browsing API key.
informational
Abuse contact lookup failed
Could not query abuse contact information.
informational
PhishTank — API key required
PhishTank phishing database check requires an API key.
informational
Sender Score — API key required
Sender Score reputation check requires an API key.
informational
Cisco Talos — API key required
Cisco Talos IP reputation check requires an API key.
informational
Could not connect to webmail.qualys.com
HTTPS request to https://webmail.qualys.com failed or timed out.
informational
WHOIS registration data
Registrar: MarkMonitor Inc. | Created: 1999-02-09 | Expires: 2028-02-09 | Updated: 2026-01-08
informational
WHOIS privacy protection not detected
Domain qualys.com does not appear to have WHOIS privacy protection. Registrant details may be publicly visible.
informational

Dependency Chains

DMARC Authentication Chain (SPF)
DMARC uses SPF to verify that emails come from authorized servers
SPF Record SPF record found and configured DMARC Policy DMARC policy: quarantine
DMARC Authentication Chain (DKIM)
DMARC uses DKIM to verify that emails have not been tampered with
DKIM Signature DKIM signature missing DMARC Policy DMARC policy: quarantine
⚠️ DKIM signature is missing. DMARC relies on DKIM to verify email integrity and prevent tampering. Without DKIM, DMARC alignment will fail for cryptographic verification.
Mail Server Identity: mxa-001ca501.gslb.pphosted.com
PTR record proves mail server legitimacy
MX: mxa-001ca501.gslb.pphosted.com Mail server at 148.163.156.198 PTR Record Reverse DNS: mx0a-001ca501.pphosted.com
Mail Server Identity: mxb-001ca501.gslb.pphosted.com
PTR record proves mail server legitimacy
MX: mxb-001ca501.gslb.pphosted.com Mail server at 148.163.158.195 PTR Record Reverse DNS: mx0b-001ca501.pphosted.com
Mail Server Reputation: mxa-001ca501.gslb.pphosted.com
RBL check ensures server is not blacklisted
MX: mxa-001ca501.gslb.pphosted.com Mail server at 148.163.156.198 RBL Status Not blacklisted
Mail Server Reputation: mxb-001ca501.gslb.pphosted.com
RBL check ensures server is not blacklisted
MX: mxb-001ca501.gslb.pphosted.com Mail server at 148.163.158.195 RBL Status Not blacklisted
Enforced Encryption Chain
MTA-STS enforces TLS encryption to prevent man-in-the-middle attacks
TLS Support Mail servers support TLS encryption MTA-STS Policy MTA-STS not configured
⚠️ MTA-STS policy is missing. Even with TLS support, you lack the enforcement layer that prevents attackers from stripping encryption (downgrade attacks).
Brand Identity Chain
BIMI displays your logo in email clients, but requires DMARC enforcement
DMARC Enforcement DMARC policy: quarantine BIMI Record BIMI not configured
⚠️ BIMI record is missing. Even with DMARC enforcement, you need to configure BIMI to display your brand logo in supported email clients.
TLS Monitoring Chain
TLS-RPT provides reports about TLS connection failures
TLS Support Mail servers support TLS encryption TLS-RPT Reporting TLS-RPT not configured
⚠️ TLS-RPT is not configured. Without TLS reporting, you have no visibility into TLS connection failures that may be impacting email delivery.

Security Checks

MX Records
SPF Record
DKIM Record
DMARC Policy
BIMI Record
CAA Records
DNSSEC
MTA-STS
TLS-RPT

Embed Badge

Display your domain's security grade on your website or README:

qualys.com Email Security Grade
<img src="https://scan.ractermx.com/badge/qualys.com.svg" alt="Email Security Grade">

Want to re-scan this domain for updated results?

Scan qualys.com Again